The Car seat sensors is a film type contact sensor, the Car seat sensor’s contact points are evenly distributed on the seat’s stressed surface, Car seat sensors Generate a trigger signal when the seat receives a pressure from the outside. The Car seat pressure sensors applies to the car seat occupancy perception system, Such as car seat belt alarm sensor system, Taxi automatic meter, car Airbag sensing system and Driver’s departure sensing. For example with this Car seat sensor, It can sense whether there are people on the seat or not, Airbags will not open if there is no one. When the driver leaves the seat, the car will automatically return to neutral. People Design car seat sensor shape and contact points’ sensitivity According to the car seat’s shape, hardness, and skin tightness.
The car seat pressure sensors usually contain four layers, up circuit layer, between adhesive layer, down circuit layer and back adhesive layer. Other accessories are wire cables and connectors.
Specification: Thermal imagery Sensor 1024PIXS
Thermal Lens : 5mm
Temperature Distance : 0.2-1.0M
Thermal pixel time constant : <4ms Temperature angle 32 degrees left and right, 32 degrees up and down Processor HI3516EV200 Image sensor 2 Megapixels, 1920 * 1080 CMOS Sensor Frame Rate 1~30fps Min. Illumination Color: 1.5 Lux; W/B: 0 Lux with IR LED ON Lens/ Visual Angle 3.6mm/100° Apply system Software version IOS7.1, Android 4.0 and above Operating system Linux Recording Mode Wholeday recording, timing recording and alarm recording Video Storage Support Max 128G TF Card Audio Compression G.711A Audio Input built-in 38dB microphone Protocols TCP/IP,HTTP,TCP,UDP,SMTP,DHCP,NTP,UPnP,P2P etc Wireless WiFi 802.11b/g/n wireless network Network Interface 1 RJ45 10M / 100M Ethernet port Detection High body temperature, >37.3
Battery : 2pcs 3000ma 18650 battery
Operating temperature : Operating temperature: 5° c ~ + 37 ° c
Power : Maximum power <5w, 5V USBpower supply
Product size : 216mm*63mm*114m
Package size : 254mm*150mm*140mm
Weight : 735g